Chevy Blazer with Lingenfelter supercharged V6 kit

The Chevrolet Blazer is a comfortable midsize crossover, and the V6 version is quick enough for family duty. It is not, however, the sort of SUV that makes people look twice. Lingenfelter Performance Engineering set out to change that. Its supercharger kit lifts the 3.6 liter V6 from 308 horsepower to around 430, which moves the Blazer into the territory of performance SUVs while keeping a calm, nearly stock appearance.

It is definitely no slouch but its nothing at all fairly like the efficiency kings like the Dodge Durango SRT and the likes. For the extreme end of Chevrolet performance, look at the front engined V8 Corvette ZR1.

What Is Lingenfelter Performance Engineering?

Lingenfelter is an Indiana based tuner with a long history of building performance upgrades for General Motors vehicles. It is known for engines and kits for Corvettes, Camaros and trucks. The Blazer kit follows the same model the company already uses on other GM products: a bolt on supercharger package, installed and tested by professionals, backed by a warranty. If you want to see how far Chevrolet itself takes performance, read our Chevrolet Corvette ZR1 buyer guide.

Lingenfelter Blazer Power and Specs

ItemStock Blazer V6Lingenfelter Blazer
Engine3.6 liter V63.6 liter V6, supercharged
Power308 hpAbout 431 hp (early estimate), up to 450 hp at the crank in later reports
Torque270 lb ftAbout 378 lb ft (early estimate)
Power gainNoneRoughly 40 percent

Treat the tuned figures as estimates. Lingenfelter’s early calculations pointed to about 40 percent more output, and later reports quoted higher numbers after calibration. A pulley upgrade was also planned for owners who want more, with a target near 500 horsepower, but pricing for that was not announced.

What Is in the Kit?

The supercharger package for the Blazer is the same hardware Lingenfelter sells for the 3.6 liter V6 in the Camaro and Colorado:

  • An Edelbrock TVS1740 supercharger.
  • A high efficiency intercooler.
  • Professional installation, with dyno testing before and after.
  • Engine control calibration.
  • A warranty on the supercharger assembly and a certificate of authenticity.

The company also reported that the kit is emissions compliant in all 50 states, which is a big selling point for anyone worried about legality. Check with Lingenfelter for the latest status before you order, because rules change.

How Does It Look?

The visual changes are subtle. A Lingenfelter Blazer gets badges and some dark exterior details, so it looks like a stock Blazer with a more serious attitude. The tuner clearly wanted a sleeper rather than a loud show car, and if you prefer the opposite approach, take a look at the Mitsuoka Orochi with a Liberty Walk body kit.

Lingenfelter Blazer Price

Lingenfelter did not confirm a price for the Blazer at the time of its reveal, but its supercharger kit for the Colorado and Canyon cost about $6,995 installed, and a do it yourself version cost around $5,500. The Blazer kit was expected to land close to those numbers.

Here is how the total might look:

  • A Blazer V6 AWD in 2LT trim started at about $35,600 when the kit was announced.
  • Add roughly $7,000 for the supercharger kit and installation.
  • That puts the total near $42,600 before options, taxes and any other upgrades.

A full performance package with suspension, brakes, exhaust and tires would cost more, and any current pricing should be confirmed with Lingenfelter directly. For a sense of how high Chevrolet prices can climb, see the most expensive 2022 Corvette Stingray.

Things to Think About Before You Buy

Brakes, tires and suspension. An extra 100 plus horsepower is a big jump for a crossover that was not built for it. Upgrading brakes and tires is a sensible step.

Warranty questions. The supercharger assembly carries its own warranty, but you should ask your GM dealer how the modification affects the rest of your vehicle warranty.

Fuel and driving habits. More power usually means higher fuel use if you drive hard. Use the recommended fuel.

Insurance. Tell your insurer about the modification.

Availability. Kits for specific model years may not be offered forever, so check what is currently supported.

Is the Lingenfelter Blazer Worth It?

If you already own a Blazer V6, the kit gives you a performance SUV for the price of an expensive set of wheels. If you are shopping for a fast crossover, compare it with factory performance SUVs, which cost much more but come with full manufacturer warranty coverage. The Lingenfelter route offers the best power per dollar, as long as you are comfortable with an aftermarket upgrade, and if you only want a cosmetic upgrade, see what a carbon fiber makeover does to the BMW 8 Series Convertible.

Lingenfelter Blazer FAQ

How much horsepower does the Lingenfelter Blazer make?
Early estimates were about 431 horsepower, and later reports said up to 450 at the crank.

How much does the Lingenfelter supercharger kit cost?
The Blazer price was not confirmed, but the matching Colorado kit costs about $6,995 installed, with a DIY version around $5,500.

What supercharger does it use?
An Edelbrock TVS1740 with a high efficiency intercooler.

Is it legal in all 50 states?
Lingenfelter reported that the kit is emissions compliant in 50 states. Confirm before you buy.

What engine does the Blazer have?
The upgrade applies to the 3.6 liter V6, which makes 308 horsepower in stock form.

Final Thoughts

The Lingenfelter Blazer is proof that a few well chosen parts can change a car’s character. It takes a sensible crossover and gives it the power of a performance SUV without a flashy body kit. For the right buyer, that quiet speed is exactly the point.

It is definitely no slouch but its nothing at all fairly like the efficiency kings like the Dodge Durango SRT and the likes. For the extreme end of Chevrolet performance, look at the front engined V8 Corvette ZR1.